User Manual

Scanner Connection 3
All Rights Reserved.
The program has been successfully
launched and the scanner is connected with
the computer, ready to scan images.
The scanner is not connected with the
computer.
Or, the scanner power is not
switched on. Or, the scanner is in standby
mode.
No Display
You have chosen to terminate the program,
no matter the scanner is connected or
disconnected with the computer.
If the icon is not displayed on the system tray, from
Windows
Start
menu, point to
All Programs
>
(your scanner
model name)
and then click
to reactivate the program
.
(
For Windows 8.1 users: Point your mouse cursor to the upper
or lower right corner of your screen to open the
Charm
bar.
Click on the
Start
charm, then click on the downwards arrow
button in the lower left corner of the screen. The
Apps
screen
will be shown. Move your cursor to the right edge of the screen
to scroll right until you find
Your scanner model name
, and
then click on
to reactivate the program
.)
3
Aligning the Scanner (This function may or may not be
available depending on the scanner model you purchase)
In most cases, the scanner doesn't need to be aligned but there are instances
when the alignment might be required. You need to align the scanner only if
parts of the scanned document are missing from any of its edges. For
example, the heading of a document might be missing from the top edge after
the document has been scanned
.
1.
Place a document face down onto the scanner glass and
align the top left
corner of the document with the upper right corner of the scanner glass
.