User Manual
10
If your scanner has the USB hub function
7
, please follow the below
connection steps:
Attention
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
1. Plug the AC adapter into the scanner’s power receptor.
2. Plug the other end of the power cable into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port at the rear of the
scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
5. If you plan to connect your scanner to a USB hub
8
, make sure that the hub is
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.
6. Plug the rectangular end of another USB cable to the USB hub at the rear of this
scanner.
7. Plug the square end of another USB cable to the USB port of another scanner.
7
This function may or may not be available depending on the scanner model you purchase.
8
The USB hub is not included with the scanner.