User Manual

14
through the left side of the window. Each icon corresponds to a button on your
scanner's panel (as well as MacAction's on-screen Execute menu). Clicking any icon
on the left pane and its current button settings are displayed immediately on the right
pane. You may adjust the settings as desired.
Click the Help button within the Button Configuration window for more information
about the settings.
Scan from the Buttons
Scanning documents or images from this scanner is very easy. Follow the two
steps described below:
1. Place the document or images onto the scanner. (Refer to “
Chapter II.
Scanning” of this guide for more information in placing paper on the flatbed
glass properly.)
Attention
Place only text documents for OCR purposes. Do
not scan a photo using the OCR button.
2. Do one of the following to start scanning:
Press the button from the scanner's panel.
Right-click the icon
in the Dock, and then choose Execute in the pop-
up menu that opens. Click the desired button function item in the pop-up
menu.
The scanner starts to scan immediately and carry out the corresponding action
according to the settings you have set up in the Button Configuration window.