User Manual

16
Clean Document Pad & Scanner Glass:
3. Wait for cleaned areas to dry completely.
4. Gently close the document cover.
POWER SAVE
To save power consumption, when the scanning process is finished, the scanner
light source will turn itself off and the scanner will enter a lower-power mode without
delay time.
CALIBRATING THE SCANNER
Calibrate the scanner if colors appear in areas that should be white, or colors of the
scanned image and the original vary a lot. This allows you to adjust and compensate
for variations that can occur in the optical component over time by its nature.
The following describes how to calibrate the scanner:
1. Click Finder > Applications > Plustek > Your scanner model name >
Calibration Wizard.
2. Click on the Start button to begin the calibration process.
3. After the calibration is complete, click OK.
Document
Pad
Scanne
r
Glass