User Manual

MacAction Help8
All rights are reserved.
Also see:
How do I configure the Copy button
?
2.2
Scan Button Configurations
Clicking the
Scan
icon on the left pane in the Button Configuration window
displays its current button settings on the right pane
.
The settings can be categorized into two:
Application and File Saving Settings
on the upper part, and
Scan Parameters
on the lower part.
The items and parameters available in the window are explained as follows:
Application and File Saving Settings
Application
Specifies an application program to be launched and linked to the Scan
button. After the scan is complete, this application program is started up
automatically and displays all scanned images.
Make sure you select an application that can process the specified file
format. Scanned images cannot be displayed properly if the specified file
format is not supported by that application.
For example, if you select file format as JPEG, PNG, BMP or TIFF
(compressed or uncompressed), make sure you select an
image-editing
application (e.g.,
Presto! PageManager
); if you select PDF to save the
scanned images, you are recommended to select Adobe Acrobat or Adobe
Acrobat Reader that has been installed in your Mac OS.