User Manual

Button Configuration Window Overview 11
All rights are reserved.
(*.exe) of the desired application program. The application is displayed here
with its full file path and execution file name.
Name
Enter the name for the newly-added application program. The name can be
short like a nickname or even in more words including complete software name
and its vendor name; that is, write anything that can help you recognize this
linked application.
This name will be displayed in the Application's drop-down menu in the Button
Configuration window.
Memo
Optionally you may enter
a short description here.
Command Line
Enter the command li
ne
and add %1 at the end of the command line
to perform
a
specific task if you have such information for the selected application
program. It is recommended that you leave this field blank if you will not use or
are unsure of the command line.
2.2.2
Save Setup dialog box (for Scan Button Configurations)
Within the Button Configuration window click the
Scan
icon on the left pane and
then click
in the right pane, which opens this dialog box.
The items and parameters available in the window are explained as follows:
Saving Folder
The scanned documents or images are saved to the folder displayed here.
To select or modify the saving folder, click
to open a dialog box where you
may browse your disk drives to select a desired saving folder. This newly
added saving folder will be added to the drop-down menu. Next time when you
want to use this folder again, you may simply click to select it from this drop-
down menu.