User Manual

Using the Scanner Buttons 51
All rights are reserved.
configured and continue adjusting other settings, or click
to abort
your adjustments and exit this window.
Also see:
File Button Settings
3.1.4.4
FTP
1.
When the Button Configuration window appears, select
FTP
Utility
from
Button Template drop-down list.
2.
Select the
Session Name
from the drop-down list.
3.
Click
to configure Saving Folder and file naming format in
the
Save Setup
window.
4.
Select the
file format
in which the scanned documents or images will be
saved. Clicking
to modify file format configurations.
5.
Check the
scan settings
and make any required changes.
6.
After all settings are done, click
to accept the settings and exit
this Button Configuration window, or click
to save what you
have configured and continue adjusting other settings, or click
to abort your adjustments and exit this window.
Also see:
FTP Button Settings
3.2
Scan from the Buttons
Scanning documents or images from this scanner is very easy. Follow the two
steps described below:
1.
Place the
document or images
onto the scanner
. (Refer to the Scanner
User's Guide for more information in placing
paper on th
e flatbed glass
properly.)