Datasheet
I/O Breakout Cable
Data Sheet
20160224
PLUX – Wireless Biosignals, S.A.
Av. 5 de Outubro, n. 70 – 8.
1050-059 Lisbon, Portugal
plux@plux.info
http://biosignalsplux.com/
REV A
© 2015 PLUX
This information is provided "as is," and we make no express or implied warranties whatsoever with respect to functionality, operability, use,
fitness for a particular purpose, or infringement of rights. We expressly disclaim any liability whatsoever for any direct, indirect, consequential,
incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data,
regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility of such damages.
SPECIFICATIONS
> Input Voltage Range: 0-3V
> Output Voltage Range: 0-3V or ±1.5V (if
reference is GND)
> Maximum Output Current: 200mA (with
no other sensors connected to the hub)
GENERAL DESCRIPTION
This accessory allows the connection, within
the specified electric values, of a wide range
of analog or digital third party sensors to the
biosignalsplux hub. This allows, for instance,
the acquisition and visualization in real time
on OpenSignals of a third party sensor, using
the biosignalsplux hub.
WARNING
Usage of this input interface VOIDS THE
ELECTRICAL WARRANTY of the hub and
sensors.
DISCLAIMER
BEWARE when using this accessory as to
preserve electrical isolation of the user. We
expressly disclaim any liability whatsoever for
any direct, indirect, consequential, incidental
or special damages, including, without
limitation, lost revenues, lost profits, losses
resulting from business interruption or loss of
data, regardless of the form of action or legal
theory under which the liability may be
asserted, even if advised of the possibility of
such damages.
Fig. 1. I/O breakout cable image
Fig. 2. Interface pinout