Data Sheet

biosignalsplux
User Manual
!
!
!
78!of!159!
!
3.2.11 Glucose Meter Reader (GMR)
Figure 66: Glucose meter reader.
This user-friendly glucose meter measures reliable glucose level data (mg/dL) using
blood samples taken from fingertips, palms, forearms, upper arms, or calves. The built-in
colour LCD display displays the measured glucose level and allows this sensor to be used
both as standalone device or as biosignalsplux sensor within OpenSignals (r)evolution
software. This sensor comes with 10 disposable single-use lancets and test strips to take
and prepare the needed blood samples.
NOTE
This sensor is an adaptation of the 3
rd
party CareSens
TM
II Blood Glucose Monitoring
System (i-SENSO, Inc) which provides compatibility with biosignalsplux devices. It can be
used both as standalone device or as biosignalsplux sensor.
Please do also read the datasheet of the standalone device before using this sensor:
http://biosignalsplux.com/datasheets/telemedicine/caresens_ii.pdf
How to connect your sensor to your biosignalsplux
Connect the sensor to the adapter box using the 3.5mm connector which comes pre-
connected to the adapter box. When done, connect the outgoing UC-E6 cable to any of
the available analog inputs of your biosignalsplux (see 2.3.2 Analog Inputs).
How to configure your sensor in OpenSignals (r)evolution
Open the OpenSignals (r)evolution device manager and select the device you have your
GMR sensor connected to. Select the channel of your sensor and set the sensor type to