Data Sheet

biosignalsplux
User Manual
!
!
!
88!of!159!
!
Figure 77: Initial state of the digital output (here: on).
To change the output state of the LED during the acquisition, click on the circle next to
DIGITAL OUTPUT in the information bar of the real-time acquisition mode. Here, again,
the LED will be turned on if the circle is blue and off is the circle is empty (see Figure 78).
Figure 78: Digital output states for LED.
OpenSignals (r)evolution Add-On: Video Synchronization
The Video Synchronization add-on has been designed for research applications which
involve recording data from sources other than the biosignal acquisition hardware
devices (e.g. video camera). Given that the biosignal hardware and the camera are
independent recording sources, a common problem when replaying the recording session
is the synchronization of both. This plugin was created to provide an easy way to replay
biosignal data synchronously with video using this LED (or the light sensor (LUX); see
3.1.9 Light (LUX) ).
This add-on is included in the biosignalsplux Professional kit (see 1.3 biosignalsplux
Professional) and the biosignalsplux Researcher kit (see 1.2 biosignalsplux Researcher), and
can also be bought additionally for the use with biosignalsplux hubs and wearables which
can be used with this light sensor.
Please visit the following website for more information about this add-on:
http://www.biosignalsplux.com/index.php/en/software/add-ons