Data Sheet

Force Sensitive Resistor (FSR)
Sensor Data Sheet
FSR 01022018
!
!
!
PLUX – Wireless Biosignals, S.A.
Av. 5 de Outubro, n. 70 – 8.
1050-059 Lisbon, Portugal
[e-mail]
http://biosignalsplux.com/
REV B!
© 2018 PLUX
This information is provided "as is," and we make no express or implied warranties whatsoever with respect to functionality, operability, use,
fitness for a particular purpose, or infringement of rights. We expressly disclaim any liability whatsoever for any direct, indirect, consequential,
incidental or special damages, including, without limitation, lost revenues, lost profits, losses resulting from business interruption or loss of data,
regardless of the form of action or legal theory under which the liability may be asserted, even if advised of the possibility of such damages.
!
SPECIFICATIONS
> Range: up to 150 Kg (depend on the type)
> Response Time: <1.2ms
> Repeatability: ~±2.5% (of full scale)
> Drift: <7%
> Consumption: ~0.4mA
FEATURES
> Thin film technology
> Pre-conditioned analog output
> High signal-to-noise ratio
> Shielded miniaturized cables
> Medical-grade raw-data output
> Ready-to-use form factor
APPLICATIONS
> Biomechanics
> Kinematics
> Ergonomics
> Reaction time measurement
> Gait analysis
> Load distribution assessment
> Human-Computer Interaction
> Robotics & Cybernetics
GENERAL DESCRIPTION
From reaction time measurement to load
distribution in shoe insoles, our thin film force
sensors offer uncompromised performance in
the most demanding applications. The low
profile membrane and miniaturized signal
conditioning circuitry are ideal for minimally
intrusive setups. Multiple sensing area
dimensions and measurement ranges are
available, enabling forces up to 150Kg,
although other options are also available
upon request. Example:
http://bit.ly/1FnY0aJ
!
Fig. 1: Example of a Type 3 force sensor.
!
Fig. 2 Typical force data (acquired with biosignals).