Legion Meter USB User Manual PLX devices inc. Patents Pending © PLX Devices Inc.
Contents 1 Introduction Patents Warnings Key Features Package Contents 3 3 3 3 Intelligent OLED Display 4 Charging Your Device with Legion Meter Toggling Menus About Legion Meter Menus Display Orientation Data Pass Through Switch 5 6 6 6 6 Storage Safety Disposal 7 7 7 2 Overview 3 Operating Legion Meter 4 6 Product Care and Maintenance Technical Specifications 3 1 Introduction Patents 4 5 7 8 PLX Devices Inc.
2 3 Overview Operating Legion Meter Charging Your Device with Legion Meter 1. Insert the USB Male A end of Legion Meter into any USB power source and make sure the data pass through slide switch is in the “A” position to enable accelerated charging. 2. Press the interface button until the Mode screen is accessed and select your charge accelerator mode. NOTE: To switch between “Apple” mode and “Android” mode, press and hold the interface button. 3.
About Legion Meter Menus Five different menus may be displayed on Legion Meter’s OLED display. These menus include Voltage, Current, Power, Milliwatt Hour, and Charge Accelerator mode selection. Product Care and Maintenence Your Legion Meter is a product of superior design and should be treated with care. The guidelines below will allow you to enjoy this product for years to come.
6 Technical Specifications Voltage Range: Current Range: Power Range: Operating Temperature: Connector Type: Display: Physical Dimensions: Weight: Meters: Intellectual Properties: Human Interface: Construction: Modes: Patents Pending TERMS OF USE – PLX Devices Inc. does not guarantee product functionality with any third party device. Implementation and integration of PLX products with any other device(s) must be done at your own risk. LIMITED WARRANTY – PLX Devices Inc.
