Datasheet

High voltage probes 5 mm

High impedance passive probes

ELFA part no. Probe model Recommended System Rise time Attenuation Load Rated voltage Cable length

scope bandwidth bandwidth

up to (-3 dB) CAT II

76-xxx-xx PHV 1000 500 MHz 400 MHz 0.9 ns 100:1 50MΩ / 7.5 pF 1000 V * 2 m

860-622-A00

76-xxx-xx PHV 1000-C 500 MHz 400 MHz 0.9 ns 100:1 50MΩ / 7.5 pF 1000 V * 2 m

86C-622-A00

76-xxx-xx PHV 1000-C-RO 500 MHz 400 MHz 0.9 ns 100:1 50 MΩ / 7.5 pF 1000 V * 2 m

86C-622-A02

76-xxx-xx PHV 1000-3-C 500 MHz 250 MHz 1.4 ns 100:1 50MΩ / 7.5 pF 1000 V * 3 m

86C-623-A00

76-xxx-xx PHV 1000-3-C-RO 500 MHz 250 MHz 1.4 ns 100:1 50 MΩ / 7.5 pF 1000 V * 3 m

86C-623-A02

 PMK passive probes feature CeramCore

technology – high quality ceramic hybric core

 RO suffix indicates ReadOut capability enabling automatic attenuation scaling with scopes

which support this feature.

 C suffix models are shipped with a case including additional accessories:

BNC adapter 5.0-L, a set of coding rings (3 x 4 colors), flexible adapter 5.0-L,

ground lead 22 cm to 4 mm banana plug and safety alligator clip (red)

* Measurement category I: 1000 VAC rms or VDC, 4000 V transient overvoltage