Datasheet

20 PMK Produktkatalog 2008 © Copyright PMK 2008
20
PHV Series probes extend the measuring range of your oscilloscope to
probe high voltages safely and easily. Applications are power supplies and
UPS-devices, frequency changers and electrical inverters in power train
engineering, semiconductor relays and IGBTs.
Our high voltage probes are suitable to view fastest signal and waveform
events e.g. norm pulses in EMC testing or glitches you want to detect.
The standard attenuations of PHV probes are 100:1 and 1000:1.
Thus pulse voltages of up to 6 kV can be measured. In measurement
category I the rated voltage is 1 kV AC / DC plus 4 kV transiente over-
voltage. Please refer to the graph on the right hand side for maximum
pulse ratings. The CAT II rated voltage is 1 kV AC / DC. With the DC fine
adjustment the attenuation can be set for certain voltages.
PHV 1000 and PHV 1000-3 models are available with cable length of 2
and 3 meters.. Other cable lengths and compensation ranges for example
for transient recorders oder measurement cards can be manufactured on
request. All probes are shipped with a wide selection of accessories.
High Voltage probes 5 mm
PHV Series
n
Modular High Voltage Probe
n
Coaxial Design
n
DC Fine Adjustment
n
HF Adjustment
n
Interchangeable Spring Tip
for reliable contacting
Model
Order-No.
Attenuation (*)
Input Impedance
Input Coupling of the Measuring Instrument
System Bandwidth (-3 dB)
Risetime (10% - 90 %)
Compensation Range (**)
Rated Voltage
Measurement category I
Measurement category II
Pollution Degree
Safety Standard (IEC / EN)
Cable Length (***)
(*) Further attenuations on request
(**) other compensation ranges on request
(***) other cable lengths on request
Certificate of calibration
Do you require calibrated equipment for your ISO certification?
Please take advantage of the possibility of having your probe
factory calibrated on our DKD* traceable DC test station.
* Deutscher Kalibrierdienst (German calibration body)