Datasheet

26 PMK Produktkatalog 2008 © Copyright PMK 2008
26
3D Probe Positioners
Positioners for Scope probes
and other measuring devices
Stepless adjustment
The PMK 3D Probe Positioners are infinitely
adjustable. The mechanical clamping sy-
tems make it possible to position the pro-
be device accurate and easily. The three
joints of the 3D Probe Positioner can
be fixed and released with one single turn
of the clamping system. PMK´s 3D Probe
Positioners offers you a great deal in effici-
ency in your testing enviromnment.
Universal 3-fold holder
When probing and verifying hardware
designs the strengths of the 3D Probe Po-
sitioniers come to bear. With the universal
probe holder PMK 2.5 mm and 5 mm
probes, but also other test and near field
probes can be used. Ask for customized
solutions, if the shown models do not
meet your requirements.
Permanent fixing
The precisely fitting in the ball-and-
socket joint guarantees a great static
friction and stability.
Secure and stable base
The three different models of the positio-
ners can be integrated simply into your test
environment. The 3D Probe Positioners
can be supplied alternatively with a steel
base, a table clamp or a vacuum cup.
The table clamp
The table clamp is the economically
version for fixing the 3D Probe Positionier
(clamping range up to 40 mm). The table
clamp is the ideal solution for installation
of the 3D Positioner at table edges and
pipes and can be installed and used both
horizontally and vertically.
The vacuum cup
The vacuum cup clings strongly and is well
suitable for the use on all non-porous and
smooth surfaces. This base variant is fixed
simply by turning over the handle and it
needs no compressed air or other energy.
The steel base
The 1200 g heavy steel base with a dia-
meter of 100 mm gives high stability. The
two bores at the steel base allow a perma-
nent fixation of the 3D Probe Positioner.
n
Hands-free testing and measuring
n
Accurate and safe positioning
n
Stepless 3D clamping system
n
3 base mount types available