eSATA II 2 Port ExpressCard User Manual Model P-NSA2-EC-RF Ver. 1.0 All brand names and trademarks are properties of their Respective owners.
Features and Benefits z Fully compliant with ExpressCard Specification 1.
Hardware Description Hardware Installation Aug/07 1. Insert the Card into the ExpressCard slot of your system. 2. Make sure the card is securely inserted.
Driver Installation For Windows® XP/Server 2003 1. At the Found New Hardware Wizard: XP(w/SP1 or earlier)/Server 2003: continue to step #2 XP(w/SP2 or later)/Server 2003(w/SP1 or later): select No, not this time, then click Next. 2. Please insert the provided driver CD into your CD-ROM Drive, select Install the software automatically (Recommended), and click Next. 3. Accept the default entry, then click Next. 4. Click Finish. 5. Restart Windows to complete the installation. For Windows® Vista 1.
For Windows® 2000 1. At the Found New Hardware Wizard, click Next. 2. Select Search for a suitable driver for my device (recommended), then click Next. 3. Please insert the provided driver CD into your CD-ROM Drive, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again. 4. If the Digital Signature Not Found message appears, click Yes. Our driver has been thoroughly tested for stability and compatibility. 5. Click Next, then Finish. 6.
displayed in the dialog box, the driver has been correctly installed. Hot-Plugging Hard Disk Drives To remove a drive from a powered up system, do the following: 1. Right click My Computer and click Manage. 2. Select Device Manager. 3. Click Disk Drives, right click the target disk and select Disable/Enable. 4. You can now remove the target disk.
