User's Manual

This feature is helpful to eliminate the annoying audio tone after the transmission is finished (end transmission noise
muffler).
(37) Side tone elimination in communication through repeater (RP-STE) - Menu No. 36
This function is used when the radio operates through a repeater; when the PTT is released, the repeater will emit the end
transmission tone to confirm it is working.
Available settings:
OFF 1,2,3,4,5,….10 to set the delay time.
Note: Please disable this function in normal using, lest affect your normal conversation.
(38) Delay time of side tone elimination in communication through repeater (RPT-RL) - Menu No.37
With this function you have the confirmation that the repeater has transferred the signal. You can choose amongst: OFF
1,2,3,4,5,….10 to set the delay time.
(39) Display mode at the turning on (PONMSG) Menu No.38
With this function you can set the display mode when the radio is turned on. Available options:
• FULL: full frequency character is displayed.
• MSG: Model is displayed.
(40) Roger beep (ROGER) - Menu No. 39
When the PTT is released, the radio will beep to confirm to other users that you have finished your transmission and that
they can start talking.
(41) Reset (RESET) - Menu No.40
With this function you can reset the transceiver to the factory-programmed settings and parameters. After that, you can set
the desired functions.