Owner's Manual

(1) Press [LAMP] button once, it will turn on continuously. (Always On mode)
(2) And then, press [LAMP] button once, the Strobe Light emits the SOS signal. (Strobe SOS mode)
(3) And then, press [LAMP] button once, the light will be turned off.
8. Emergency Alert
The Emergency Alert feature can be used to signal members in your group for help.
To activate the Emergency Alert function, press and hold the [LAMP] button for 3 seconds. The Emergency Alert
icon
will appear on the display, the radio will send out a loud siren sound and the flashlight will flash.
To deactivate the Emergency Alert function press and hold the [LAMP] button again for 3 seconds.
WARNING: The Emergency Alert feature should only be used in the even of an actual emergency.
9. Keypad Lock
To avoid accidentally changing the radio settings, press the [ /MENU] button for 2 seconds. The icon will appear on the
display. [PTT] and CALL will still be active. Repeat the same procedure to unlock the keypad.
10. Using the Weather Radio/Scan Weather Channel
Your radio has a NOAA Weather Radio function, to enable the user to receive weather reports from designated NOAA
stations. Your radio also has a NOAA Weather Scan function, to enable the user to scan all 12 channels of the NOAA Weather
Radio. While using the Weather Radio, you are not able to receive FRS communications.
(1) To turn the NOAA Weather Scan on, press and hold the [
/MONI] button for 5 seconds while in FRS mode, icon
appears. The radio will go to Weather band mode and start scanning all 12 channels and stop on any active channel.
When the channel becomes inactive for 10 seconds the radio will resume scanning.
(2) To stop the NOAA WEATHER (WX) SCAN and set the channel manually on the Weather band, press the [SCAN] button
during NOAA weather scan. The radio will stop scanning and the display will show the current Weather band channel
setting and the
icon.