User Manual

or UHF) in the main or secondary display. When listening to broadcast FM, the [EXIT] key switches between 65-75 MHz
and 76-108 MHz band.
The radios feature a battery voltage meter that the current voltage of the battery on the display.
To see the voltage displayed, press and hold [EXIT] key for about two seconds.
• Numeric keypad
With these keys you can input the information or
your selections on the radio. In tx mode, push the
number keys to send a corresponding DTMF code.
• * Key
A short momentary press of the key enables the reverse function.
If you press this button for more than 2 seconds you will lock/unlock the keypad.
• #SCAN key
If you press shortly [#SCAN] you will switch to High / Low output power.
When listening to broadcast FM a momentary press will start the scanning. Scanning in broadcast FM will stop as soon as
an active station is found, regardless of scanner resume method.
To enable the scanner, press and hold the [#SCAN] key for about two seconds.