User Manual

• EOT: the code is sent when the PTT is released
• BOTH: the code is sent when you press and release the PTT
Note: select ‘OFF’ when using in case of affecting the radio.
(23) Channel A Display Mode (MDF-A) - MENU No.22
This function is used to set the display mode of channel A.
Display modes:
• Frequency: Frequency + channel No.
• Name: Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(24) Channel B Display Mode (MDF-B) - MENU No.23
This function is used to set the display mode of channel B.
Display modes:
• Frequency: Frequency + channel No.
• Name: Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(25) Busy Channel Lock (Busy Lock) - MENU No. 24
When this function is on, it may prevent other radios’ interference. If the selected channel is being used by other radios,
when you press key PTT, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.
(26) Auto Keypad Lock (AUTO LK) - MENU No.25
When this feature is activated, the keypad will be automatically locked after 15s; this prevents accidental pressure of any
keys.
The keypad lock can be manually activated/deactivated through the keypad: keep pressed [*
] .