User Manual

(37) Roger beep (ROGER) - Menu No. 36
When the PTT is released, the radio will beep to confirm to other users that you have finished your transmission and that
they can start talking.
(38) 1750Hz Repeater Tone (R-TONE) - Menu No.37
With this function you can select 1000Hz, 1450Hz, 1750Hz, 2100Hz repeater tone. To send out a repeater tone; You hold
down the [PTT] + [SK2] key.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to
unlock your radio.
(39) Power on image (Power on Msg) - Menu No.38
With this function you can set the display mode when the radio is turned on. Available options:
• Logo: Display the preset startup picture.
• Msg: Welcome message.
• Voltage: The power voltage is momentarily displayed.
(40) Language selection (Language) - Menu No. 39
With this function, you can select the language of the LCD display and operation prompt.
(41) Frequency hopping system (Hopping Freq) - MENU No. 40
With this function, you can activate the frequency hopping system, improve the anti-interference ability of the radio, and
reduce the risk of being monitored.
(42) Reset (Reset) - Menu No.41
With this function you can reset the transceiver to the factory-programmed settings and parameters. After that, you can
set the desired functions.
There are two types of reset: