User Manual

17
S-CODE - Signal
Code
MENU+17
1,…,15
* Signal code (only could be set by PC software)
18
Scan Add-Scan
channel add
MENU+18
ON: the current channel is added to the scan, the
scan current channel
OFF: Do not scan the current channel.
19
Scan Ran- Scan
Frequency Range
MENU+19
136-174 & 400-520MHz
*Ex. 144 148 input and scan range is
144.0000-148.0000
* Scanning frequency range, valid in VFO mode.
The channel mode, invalid input, cannot be saved
20
Scan Mode -
Scanner Resume
Method
MENU+20
Time - scanning will resume after a fixed time has
passed
Carrier -scanning will resume after the signal
disappears
Search -scanning will not resume
21
PTT-ID - PTT-ID
MENU+21
Off: No ID is sent
BOT: The selected S-CODE is sent at the beginning
EOT: The selected S-CODE is sent at the ending
BOTH : The selected S-CODE is sent at the beginning
and ending
22
MDF-A - Channel A
Display Mode
MENU+22
Frequency: Displays programmed Frequency
Name: Displays the channel name
*Note: Names must be entered using software.
23
MDF-B - Channel B
Display Mode
MENU+23
Frequency: Displays programmed Frequency
Name: Displays the channel name
*Note: Names must be entered using software.