User Manual

24
Busy Lock – Busy
Channel Lock-out
MENU+24
Off
On
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a beep
tone and will not transmit if the [PTT] button is
pressed when a channel is already in use.
25
AUTO LK
–Automatic
Keypad Lock
MENU+25
Off
On
*When ON, the keypad will be locked if not used in
8 seconds. Pressing the [* ] key for 2 seconds will
unlock the keypad.
26
Direction –
Frequency Offset
Direction
MENU+26
None: TX = RX (simplex)
Plus: TX will be shifted higher in frequency than RX
Minus : TX will be shifted lower in frequency than RX
27
Offset -Frequency
shift
amount
MENU+27
00.000…69.990
*Specifies the difference between the TX and RX
frequencies
28
Memory - Store a
Memory Channel
MENU+28
000…250
*This menu is used to either create new or modify
existing channels (0 through 250) so that they can
be accessed from
MR/Channel Mode
29
Delete - Delete a
memory channel
MENU+29
000…250
*This menu is used to delete the programmed
information from the specified channel (0 through
250) so that it can either be programmed again or
be left empty.