User Manual

30
Alarm Mode -
Alarm Mode
MENU+30
Site: Sounds alarm through your radio speaker only
Tone: Sending alarm tone
Code: Sending alarm code
31
SEEK CTC -Scan of
frequencies with
CTCSS
MENU+31
67.0HZ,…,254.1HZ
*Automatic stop after receiving the CTCSS signal
32
SEEK DCS -Scan of
frequencies with
DCS
MENU+32
D023N,…,D754I
*Automatic stop after receiving the DCS signal
33
TAIL - Squelch Tail
Elimination
MENU+33
On
Off
*This function is used eliminate squelch tail noise
between handhelds that are communicating directly
(no repeater). Reception of a 55 Hz or 134.4 Hz tone
burst mutes the audio long enough to prevent
hearing any squelch tail noise.
34
RP-STE-Squelch
Tail Elimination
MENU+34
Off/ 1,2,3…10
*This function is used eliminate squelch tail noise
when communicating through a repeater.
35
RPT-RL - Delay the
squelch tail of
repeater
MENU+35
Off/ 1,2,3…10
*Delay the Tail Tone of Repeater (X100 milliseconds)
36
ROGER - Roger
Beep
MENU+36
Off
On
*Sends an end-of-transmission tone to indicate to
other stations that the transmission has ended.