Installation Guide

Dear Customer,
Thank you for your purchase of the new Pocket Hose® Silver Bullet™.
Instructions For Use:
1. Remove the Pocket Hose® Silver Bullet™ from the package and completely unravel.
Note: The Adjustable Spray Aluminum Nozzle will be extended in the closed position.
(Figure 1)
2. Ensure Adjustable Spray Aluminum Nozzle is attached tightly to the connector.
(Figure 2)
3. Attach the Pocket Hose® Silver Bullet™
inlet to the water supply of your home.
(Figure 3)
4. Turn on the tap from your home’s water supply and let the Pocket Hose® Silver
Bullet™
fully expand.
5. Holding the connector between thumb and forenger, turn the nozzle counter-
clockwise to the open position to spray.
Storing the Pocket Hose®Silver Bullet™:
After use, turn o the tap for your home’s water supply. Twist open the Adjustable
Spray Aluminum Nozzle to drain the water from the Pocket Hose® Silver Bullet™.
As this happens, the Pocket Hose® Silver Bullet™ will shrink to its original size.
NOTE: To prolong the life of your Pocket Hose® Silver Bullet™, completely drain
and ALWAYS store INDOORS when not in use.
To use your own spray nozzle:
Adjustable Spray Aluminum Nozzle can be removed from the Pocket Hose® Silver
Bullet™ if you prefer to use your own spray nozzle. Turn nozzle counter clockwise to
remove and then attach your own spray nozzle.
Using Adjustable Spray Aluminum Nozzle
Turn Adjustable Spray Aluminum Nozzle counter-clockwise to turn on. Turn
clockwise to turn o.
Nozzle is extended
in Closed Position
To turn to Open
Position, turn counter-
clockwise
Attach
Pocket
Hose®
Silver
Bullet™ Inlet
to Water
Supply
Figure 1 Figure 4Figure 3
Adjustable
Spray
Aluminum
Nozzle
Attached to
Connector
Figure 2
137
568
IMPORTANT SAFETY INSTRUCTIONS, READ AND FOLLOW ALL
WARNINGS AND INSTRUCTIONS BEFORE USING THIS PRODUCT.
INJURY CAN RESULT FROM IMPROPER USE.
SAVE THESE INSTRUCTIONS.
Faireld, NJ 07004
www.Bulbhead.com • Made in China • ©2018 Telebrands Corp.