User's Manual

Getting Started 23
name will turn to the same as Network name (SSID).
If you’d like to change connection (for example,
Home or Ofce) press OK and enter connection
name as you’d like it to be displayed on the Device
NOTE Connection name eld species only the display
name of the connection. For correct communication Net-
work name (SSID) must be the same as network transmits
4. Select security type in the corresponding
list:
• None – for open network
• Simple (WEP) – after you select this op-
tion, you will need to specify WEP Authentica-
tion type – Open System or Shared Key either.
The Device cannot recognize authentication
type automatically
• WPA/WPA2 Enterprise – you will need to
specify username, password and domain (if
necessary)