User's Manual

Settings
In this chapter you will learn how configure the interface
and software features of the Device for the most
comfortable usage. Select Settings at “Notification panel”
to configure the Device. All changes will be applied after
exiting the section.
WI-FI
In this section you can set parameters needed for network
connection.-
Network access — on or off. After network access
activation, the following settings appear:
• Connection to hidden networks — read more in
the Connecting to the Internet section of this manual.
• Available Networks — a list of available networks.
Choose one of them and you’ll see parameters of this
connection: Network name (SSID), signal strength, security,
IP-address, network mask, main gateway, DNS.
NOTE: If Scanning is displayed instead of Available Networks, it means that
Device is searching for available networks.