612

Network Connections 77
NOTE After selecting WEP encryption it’s necessary to
select WEP Authentication type: either Open System or
Shared Key. System cannot recognize authentication
method automatically.
Encryption is not set by default. When selecting the
type of encryption, the box for entering an access
code will be displayed
NOTE You can use up to 64 characters in your password
for WEP-PSK encoding.
5. Open Disconnect when idle (min) and select a
value from the drop-down list
6. Select Network Settings, and press OK on
IP-address Conguration and select from the drop-
down menu:
a) DHCP (if a DHCP server is congured in the
network)
b) Manual – set the network parameters
manually