912

Network Connections 50
CONFIGURING WI
-
FI CONNECTION
1. Select Conguration > Connectivity > Bluetooth con-
nections > Bluetooth Audio Devices. Select the connection you
want to congure. By default, non-preset connections are
named Connection No…
2. Press Network name (SSID) and select the access
point from the list
3. Connection name will turn to the network name. If
you want to rename the connection, press Connection Name
and enter name from the on-screen keyboard appeared
4. Set encryption type from the Security drop-down list
NOTE After selecting WEP encryption it’s necessary to select WEP
Authentication type: either Open System or Shared Key. System can-
not recognize authentication method automatically.
Encryption is not set by default. When selecting the type of en-
cryption, the box for entering an access code will be displayed
NOTE You can use up to 64 characters in your password for WEP-
PSK encoding.
5. Open Disconnect when idle (min) and select a value
from the drop-down list
6. Select Network Settings, and press OK on IP-address
Conguration and select from the drop-down menu:
a) DHCP (if a DHCP server is congured in the
network)
b) Manual – set the network parameters manually