User manual

Getting Started 22
1. At the notification bar go to Settings > Network >
Network Access;
2. Select On for the Network access checkbox and
then further settings appear: Auto connection, Connection
to a hidden network, and a list of available Wi-Fi networks.
NOTE If there are no available networks or the signal strength is
week, Available networks are not displayed and instead replaced
by Scanning — searching for available networks.
3. To set up connection with a hidden network, open
Connection to a hidden network and enter its SSID from
the on-screen keyboard in the Network name (SSID) field.
4. Select security type in the corresponding list:
• None – for an open network;
• Simple (WEP) – after you select this option, you
will need to specify WEP Authentication type – Open
System or Shared Key either. The Device cannot rec-
ognize authentication type automatically;