User manual

Getting Started 23

• WPA/WPA2 Enterprise – you will need to spec-

ify username, password and domain (if necessary);

• WPA/WPA2 PSK – you will need to enter net-

work key (up to 64 symbols).

5. Open Advanced settings. Select the idle time be-

fore disconnection in the corresponding section.

6. If it is needed to conﬁgure network settings manually,

go to Advanced settings, and change IP address conﬁguration:

• DHCP — get IP address automatically (if DHCP

server is conﬁgured);

• Manual (for skilled users) — enter networks pa-

rameters manually from the on-screen keyboard.

7. If the network you need to connect to has a proxy server,

you can specify its parameters in Proxy conﬁguration section.

8. To check network configuration and connect to a network,

return to the Connection to hidden network section and press Connect.

NOTE Wi-Fi connection can be used for connecting to an Internet network.

Transferring data via Wi-Fi connection is unavailable. The Device can be con-

nected to a Wi-Fi access point with MAC address ﬁltration applied.