User Manual

Page5/15
Begin to use
The product picture below Is subject to the material object.
Component
Explanation
Power button
Powering on/ off and sleep
Speaker
Playing sounds (such as navigation
prompt tones, music, etc.)
Reset hole
Press to factory default setting
Earphone jack
Connected with the earphone
T-flash card slot
Insert T-flash card to extend storage
MINI USB port
Connect with PC via MINI USB
cable, or used as the charging port
Indicator light
Indicating the operating state of
external power supply
The main functions are listed as below.
Function Explanation____________________________
Navigation tap to enable navigation function;
FM
Go to FM function;
Music Player
MP3 and WAV files supported; Random,
sequence and cycle play supported;
GPS Viewer
Display GPS infos and signal status
Tools
Go to the calculator and unit converter;
Setting
Volume, backlight, language, date/time,
calibrate, USB, system info, factory reset
and navi path setting;
Multimedia
WMV, ASF and AVI files supported;
Power Supply & Charging
The GPS can be powered by the built-in battery or external power
supply. When the GPS navigator is unconnected to the charger, it is
powered by the Li-polymer battery. When the GPS navigator is
connected to the charger (included car charger and USB cable), it is
powered by external power and the battery is charged.
Note!
1) When you turn on the GPS navigator, you need to press the
power button for 3-5 seconds.
2) Fully charge the GPS navigator with the charger before first use.
Plug one terminal of the car charger into the USB port of the GPS
navigator, then the other terminal to the charging port of electric
source.
3) The charging indicator light is red during charging. Do not
unplug the charge until the indicator light turns green which
indicate the battery is fully charged. Please charge the GPS
navigator when the battery is low or used up.
4) To avoid damage due to current surge, plug in the car charger
after the automobile is started, To make sure the navigator
always on, please keep charging the navigator during use it.
5) Please notice that if you charge the GPS by connecting it to the
computer with the USB cable, it will be charged very slowly (or
won't be charged in this case). So it's better to charge the
navigation by using the USB cable to connect with an AC
adaptor (Power adaptor for your mobile phone or other