User Manual

Page11/15
Connecting to FM
Regarding connecting the unit to your car stereo, please do the as
following,
Click the icon "FM" on the main menu → tick "Use FM" and set a
certain channel (please don't set the channel the same as or close to
the local radio station)
→
turn on your car radio
→
set the same
channel as the one you set in your GPS unit
→
then the sound of GPS
can be played in your stereo. Now you can adjust the volume based
on your personal interest.
『Notice] No sound will come out from the GPS unit if you turn on
the FM.
Vehicle Settings
The default vehicle mode is truck mode.
You can change it according to your actual request as the following
way:
Navigation →Settings(Tools icon: )→ Route Settings →
Vehicle(chose your vehicle type and tick it). You have 7 vehicle
modes between
Car/Pedestrian/Bicycle/Emergency/Bus/Taxi/Truck(Lorry). After
you selected the vehicle mode you need, then click the icon 'screw
and spanner , you can enter the basic information of your vehicle
such as such as length, width, height and Max. Speed.
The following is the Max. Speed modification interface:
How can the current speed displayed on the map:
After you have entered the destination and started, you get an
interface like the following
picture
:
You can also see that there are three options in the lower right corner:
"Distance", "Time Left", "Speed Limit". Long press any icon, e.g.
Speed Limit. You can get the following interface.