User Manual

CAMERA WIRING: (Camera Optional)
1. Camera's power cable: red and black.
--- Red connect to reverse light positive, black to reverse light negative.
2. RCA cable: yellow port.
---- Insert into CAMIN port (yellow) on the radio
3. Trigger cable : cable named "BACK/reverse/parking sensor control" on the radio
backside harness, according to the wiring diagram label on machine bottom. .
--- Connect this cable to reverse light positive wire of the car.
Note 1: the short red cables beside the RCA port don't need to connect.
Thus, when you pull the reverse gear, the device will show rear view image
automatically.
Note 2: For different radio and producing, wires color and function may be
changed slightly. Please refer to the wiring diagram on the bottom of the radio as
standard.
How to confirm if the camera is good?
After connect the camera power cables,
For LED light camera, if LED lights up, camera is good.
For IR light camera, cover the camera lens by your hand, if the IR light is up,
camera is good.