Operating Manual

RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) Offset)
TX CTCSS tone 123.0
a. Press the [Back] button to switch between menus.
b. Press and hold the [MENU] key to set the radio to VFO mode, and the channel number on the right will disappear.
c. [MENU][2][7][MENU] [1] [0] [MENU] [Back] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU] 123.0 [MENU] [Back] Selects desired TX encode tone
e. Enter RX frequency (Ex. 43255000)
f. [MENU] [2][6] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)
-->>[Back] RX has been added
g. Enter TX frequency (Ex. 43755000)
h. [MENU] [2][6] [MENU] [1][0] [MENU] Enter the same channel (Ex 10)
-->> [Back] TX has been added
i. Press and hold the [MENU] key to return to the MR mode and the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 432.6625 MHz
TX CTCSS tone 123.0
a. Press the [Back] button to switch between menus.
b. Press and hold the [MENU] key to set the radio to VFO mode, and the channel number on the right will disappear.
c. [MENU] [2][7] [MENU] [1] [0] [MENU] [Back] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU] 123.0 [MENU] [Back] Select desired TX encode tone (Ex 123 CTCSS)
-->>Use [Back] to select Upper display
e. Enter RX frequency (Ex. 43266250)
f. [MENU] [2][6] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)
-->> [Back] Channel has been added
g. Press and hold the [MENU] key to return to the MR mode and the channel number will reappear.