Operating Manual

NOTES: The function cannot be activated when the radio is set in Channel mode. The Scan will start only when the
receiving band will detect a signal.
(32) Squelch tail elimination (TAIL) - Menu No. 31
This function is used eliminate squelch tail noise between POFUNG handhelds that are communicating directly (no repeater).
Reception of a 55 Hz or 134.4 Hz tone burst mutes the audio long enough to prevent hearing any squelch tail noise.
(33) Squelch tail elimination of repeater (RP-STE) - Menu No. 32
This function is used when the radio operates through a repeater; when the PTT is released, the repeater will emit the end
transmission tone to confirm it is working.
Available settings:
OFF 1,2,3,4,5,….10 to set the delay time.
Note: Please disable this function in normal using, lest affect your normal conversation.
(34) Delay the squelch tail of repeater (RPT-RL) - Menu No.33
With this function you have the confirmation that the repeater has transferred the signal. You can choose amongst: OFF
1,2,3,4,5,….10 to set the delay time.
(35) Roger beep (ROGER) - Menu No. 34
When the PTT is released, the radio will beep to confirm to other users that you have finished your transmission and that
they can start talking.
(36) 1750Hz Repeater Tone (R-TONE) - Menu No.35
With this function you can select 1000Hz, 1450Hz, 1750Hz, 2100Hz repeater tone. To send out a repeater tone; You hold
down the [PTT] + [SK2] key.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to
unlock your radio.