Operating Manual

24
Direction –
Frequency Offset
Direction
MENU+24
None: TX = RX (simplex)
Plus: TX will be shifted higher in frequency than RX
Minus : TX will be shifted lower in frequency than RX
25
Offset -Frequency
shift
amount
MENU+25
00.000…69.990
*Specifies the difference between the TX and RX
frequencies
26
Memory - Store a
Memory Channel
MENU+26
000…127
*This menu is used to either create new or modify
existing channels (0 through 127) so that they can
be accessed from
MR/Channel Mode
27
Delete - Delete a
memory channel
MENU+27
000…127
*This menu is used to delete the programmed
information from the specified channel (0 through
127) so that it can either be programmed again or
be left empty.
28
Alarm Mode -
Alarm Mode
MENU+28
On site: Sounds alarm through your radio speaker
only
Send sound: Sending alarm tone
Send code: Sending alarm code
29
Scan CTCSS -Scan
of frequencies
with CTCSS
MENU+29
67.0HZ,…,254.1HZ
*Automatic stop after receiving the CTCSS signal