Safety Information

(39) Language selection (Language) - Menu No. 38
With this function, you can select the language of the LCD display and operation prompt.
(40) Frequency hopping system (Hopping RX) - MENU No. 39
With this function, you can activate the frequency hopping system, improve the anti-interference ability of the radio, and
reduce the risk of being monitored.
(41) Reset (Reset) - Menu No.40
With this function you can reset the transceiver to the factory-programmed settings and parameters. After that, you can set
the desired functions.
There are two types of reset:
• VFO: Menu Reset
• ALL: Menu and channel Reset
(42) Dual Band single display (SYNC) - Menu No.41
The radio is dual-band, dual-display, and the screen can display A/B frequency band at the same time. It can also be set to
dual-band single-screen display. When single frequency point is displayed, the channel nickname, frequency and channel
number will be displayed at the same time.
•On: Turn on the SYNC function and display the alias, frequency and channel number of the current channel.
•Off: Turn off the SYNC function, which is a dual-segment dual display mode. The main frequency and sub frequency will be
displayed.