User's Manual

background noise or undesired signals.
• levels 1- 9: level 1 (lowest squelch level), level 9 (highest squelch level).
If the squelch is set to the highest level, the radio will receive the strongest signals only.
(2) Step frequency (STEP) - MENU No.1
This function lets you select the desired frequency step.
The selectable steps are the following: 2.5/5.0/6.25/10.0/12.5/20.0/25.0/50.0 KHz
Note: in channel mode, this function cannot be modified.
(3) Output power (TXP) - MENU No.2
In this MENU you can select the high/low output power.
Low power = 2W; High power = VHF 8W / UHF 7W
Note: select the output power can improve the quality of the call, while the low output power can reduce the radiation
and the battery capacity loss. Press the fast key “#
” to switch between the high or low output powers.
(4) Battery save (SAVE) - MENU No.3
The power save feature enables a reduction in the consumption of the battery when the radio is in standby.
You have 5 selections available: OFF / 1:1 / 1:2 / 1:3 / 1:4.
For example: 1:1 = 1s’ working and 1s’battery saving. 1:2 = 1s’ working and 2s’ battery saving.
(5) VOX Function (VOX) - MENU No.4
This function allows hands-free conversations: just speak in the direction of the microphone and the communication will be
automatically activated.
You can choose amongst 11 levels: OFF-10. 1 is the highest level, 10 is the lowest one.
Note: the higher is the level, the higher is the microphone sensitivity. The VOX function cannot be modified in SCAN and
FM radio mode.