User's Manual

(31) RX backlight (RX-LED) - MENU No. 30
In this MENU you can choose the backlight color when the radio is receiving.
You can choose amongst:
• OFF (backlight off) • BLUE
• PURPLE • ORANGE
(32) TX backlight (TX-LED) - MENU No.31
You can choose the backlight color when the radio is transmitting.
Available colors:
• OFF (backlight off) • BLUE
• PURPLE • ORANGE
(33) Alarm Mode (AL-MOD) - MENU No.32
This function can set the tone alarm/code alarm/site alarm of the radio.
Keep pressed the [CALL] key for 3 seconds to start the alarm tone.
The following three options can be selected:
• SITE: the speaker emits an alarm tone but the radio doesn’t transmit;
• TONE: the speaker emits an alarm tone and the radio transmits it;
• CODE: the speaker emits an alarm tone and the radio transmits it followed by ANI-ID code.
(35) Dual Watch (TDR-AB) - Menu No.34
When this function is on, you may receive signals of A/B channel or frequency. It can also be used for cross band receiving
and transmitting. You can choose amongst the following settings:
OFF: UV-10R can receive in both VFO (not simultaneously); ▲ or ▼ will blink on the transmitting frequency band.
A: the radio can receive in both VFO (not simultaneously) but can transmit in VFO A only.