Operating Manual

When the radio is in frequency working mode or standby mode, input the desired frequency or parameters directly.
To set a CTCSS tone or a DCS code in tx or rx on the stored channel, refer to paragraphs MENU 10-13
Note: You cannot overwrite a stored channel; you have to delete it first. See following paragraph No.28.
(29) Channel Delete (DEL-CH) - MENU No.28
In this menu you can delete a channel of the radio.
(30) Standby backlight (WT-LED) - MENU No.29
In this MENU you can choose the color of the backlight when the radio is in standby mode.
You can choose amongst:
• OFF (backlight off) • BLUE
• PURPLE • ORANGE
(31) RX backlight (RX-LED) - MENU No. 30
In this MENU you can choose the backlight color when the radio is receiving.
You can choose amongst:
• OFF (backlight off) • BLUE
• PURPLE • ORANGE
(32) TX backlight (TX-LED) - MENU No.31
You can choose the backlight color when the radio is transmitting.
Available colors:
• OFF (backlight off) • BLUE