User's Manual

To download or upload MP3 files, the RipFlash Recordable MP3 Player must be connected to
your PC or laptop with the supplied USB cable.
Turn on the RipFlash Recordable MP3 Player by pressing the [Play] key.
Connect the USB cable to the USB port of the RipFlash Recordable MP3 Player.
Plug the other side of USB cable to the USB port on the
back of your PC.
How to connect to PC driver installation
Your PC will recognize the connection with the USB controller of the RipFlash Recordable
MP3 Player and will start the set-up process automatically.
The following screen images will prompt you through the appropriate steps.
Troubleshooting
If you experience problems with your RipFlash Recordable MP3 Player, refer to the
“Question/Answer” troubleshooting section below.