User manual

28 29
Save location
 ForsavingyourlocationpresstheM-buttonforatleast3seconds.
You can assign the logged POI to one of the four POI types and
add the speed limit, during the record. Logged POIs get
 transferedwhilethenextupdatetotheprivatPOI-category
 “MyprivatePOIs“»“RecordedPOIs“.Theyarenowavailableto
get edited in the interactive card.
 RecordedPOIsarenotautomaticallypublished.Toreportnew
radar traps use the interactive card in the POIbase software.
There you have the opportunity to move POIs from the private
 category„RecordedPOIs“topubliccategorysforexample
 “Speedcameras“(functionchangecategory).
Factory settings
 Ifallthreebuttons(“M”,“+”,and“–”)arepressedsimultaneously
for at least 3 seconds, all the settings are reset (the data is
retained).
Delete data
 Ifthe“+”and“–”buttonsarepressedsimultaneouslyformore
than 3 seconds, all POI data (incl. the speed traps) will be deleted.
Note: The POI PILOT is supplied without data. You as the
user decide yourself during installation via the POIbase
software which POI types and categories should be installed.
In a stationary motor vehicle, the POI Pilot 6000 displays the time
(giveortakeanhouraccordingtosummer/wintertime).During
thejourney,thedisplaychangesandshowsthecurrentGPS-based
speed.
POI PILOT 6000 FUNCTIONING AND OPERATION
The POI PILOT 6000 provides acoustic and visual warnings about
particularpoints/dangersinroadtrac.Indoingso,thePOIPilot
dierentiatesbetweentheplayback/warningaboutstationaryand
mobile speed trap locations, safety POIs with particularly dangerous
curves, intersections, railroad crossings, speed bumps, and other
POIs such as cheap petrol stations, opened emergency pharmacies,
butalsofast-foodrestaurants.
Basic settings
The POI PILOT 6000 is already optimally con gured for the
requirementsofmostusers,exworks.Thefollowingsimple
operatingoptionsareavailableviathethreebuttons(-/M/+):
Adjust volume
 Thevolumecanbeadjustedviathe“+”and“-”buttons.
„M“-Button
2
3
„+“-Button
„-“-Button
1