User manual

34 35
 Delete data
 •aDL = Deletealldata,alldatawillbedeletedfromthememory
    ofthePOIPilot.Thedatamustbere-installedviathePC
software to use it again.
 •dOP= DeleteownPOIrecords,onlyPOIsrecordedbytheuser
    viatheMbuttonwillbedeleted.
 •CAN=Canceldeletion.
 Reset to factory settings
 •YES=Resetsallsettings(warningsettings1.–4.aswellas
    systemsettings5.)todefault.Dataisretained.
 Back to main menu
 Viathissubmenuitem,youcandirectlyaccessthemainmenu.
 Alternatively,thedeviceautomaticallyswitchesafterafew
seconds to the normal view.
Display switch-o, if no warning
 •NO =Displayonandshowstime,speed,ordistancetowarning
point.
 •YES=Displayisactivatedonlyduringawarningandiso
between warnings.
 Day/night mode
 •0 =Automatic,displaybrightnessswitchesautomatically
between day and night brightness depending on location
and time (astronomical computation).
 •1 =Day,displaybrightnesspermanentlysettodaybrightness.
 •2=Night,displaybrightnesspermanentlysettonight 
brightness.
 Brightness day
0 –8 =Brightnessindaymode.
 Brightness night
0 –8 =Brightnessinnightmode.
 Speed warning (cruise control)
 •OFF=Nowarningaboutaxedspeed.
 •10–210km/h=Ifthespeedsethereisexceeded,anacoustic
warning is given independently of warning
points. This function can be used, e.g., to be
     remindedofthemaximumpermissiblespeedof
winter tires.