User's Manual

PM451 Android 9.0 User Manual

Getting Started

Charge the device

1. Open the cap of the USB connector on the left side of the PM451

2. Assemble the proper country plug and the AC/DC power supply

3. Plug USB type C cable to the AC/DC power supply

4. Connect the cable to PM451 and provide power by plugging the power supply to the wall socket

Battery Specification

Battery Type Capacity Charging time

Extended Battery (Basic) 5700 mAh / 3.7V About 5 hours

Standard Battery 4000 mAh / 3.7V About 4 hours

Backup Battery 60 mAh / 3.7V

Caution:

Always use an original charger and cable from Point Mobile. Other chargers

and cables may damage PM451. Also, make sure the connector, charger and cables are

not wet.

Figure 8 Open USB cap