User Guide

ManualsBrandsPOINT Mobile ManualsMobile ComputerPOINT Mobile PM67 Rugged Mobile Computer

Quick Start Guide

V1.0, Jun 2021

Point Mobile Co., Ltd. is the designer and manufacturer of mobile handheld devices.

The Point Mobile logo is a registered trademark and symbol of Point Mobile Co., Ltd.

Features and specifications are subject to change without prior notice.

PM67

Summary of content (8 pages)

PAGE 1
Quick Start Guide PM67 V1.0, Jun 2021 Copyright © 2021 Point Mobile Co., Ltd. All rights reserved. Point Mobile Co., Ltd. is the designer and manufacturer of mobile handheld devices. The Point Mobile logo is a registered trademark and symbol of Point Mobile Co., Ltd. Features and specifications are subject to change without prior notice.
PAGE 2
Device Parts 2 1 3 4 9 8 5 7 6 1. Receiver 2. LED indicator & Sensor 3. Touch screen 4. Software buttons 5. USB Type C connector 6. I/O connector 7. Keyapd 8. Scan button (Left) 9.
PAGE 3
Device Parts 13 12 11 10 14 15 17 16 10. Rear camera & Flashlight 11. Battery cover 12. Battery cover release button 13. Hand strap hole 14. Speaker 15. Scan button (Right) 16. Power button 17.
PAGE 4
Product Standard Accessories Standard battery Country plug LCD protection film Product Optional Accessories AC/DC power supply Single Slot Cradle Single slot Ethernet Cradle 4 Slot Cradle 4 Slot Battery Cradle USB type C cable Hand strap Gun handle Stylus pen
PAGE 5
Install SIM, SD card Install Battery PM67 supports micro SIM and microSD card. (SIM card is supported by LTE SKU only.) 1. Open the battery cover while pressing the battery cover release button. 1. Open the battery cover while pressing the battery cover release button. Pull the cover up using small hole on both sides. 2. Insert the battery from top to bottom with the contacts facing down. 2. Insert the SIM card and SD card into proper slot in the correct orientation. (Gold contact must be facing down.
PAGE 6
Charging the Device LED Indicator 1 2 1. Assemble the AC/DC power supply, country plug and USB type C cable. No Indicator Status Indication Solid red Charging the device (With charger) / Battery is low (Without charger) Blinking red Charging temperature is too low or high (With charger) / Battery is critical low (Without charger) Solid green Device is fully charged Blinking blue Notification existing Red flash Barcode reading failed Blue flash Barcode reading success 2.
PAGE 7
Turn on / off Scan a Barcode Scanner is placed on the top of the PM67. Scanner is disabled by default, so enable the scanner from ScanSettings first. Then, press a scan button on the device to scan a barcode. Ideal Aiming Center the green dot aimer or the cross-hair laser aimer over the barcode. The entire barcode must be inside the illumination square. N3601 Scanner SKU Turn on Press and hold the Power button on the right side of PM67 until SMART BEYOND RUGGED logo displays on the screen.
PAGE 8
Certification Model: PM67 Trade name of certified: Point Mobile Co. Ltd.