Operation Manual

Chapter 3 Peripherals
3-2
There are two memory module ports. Place the new memory module in the slot,
matching up the notch along its connector rim with the tooth in the connection slot.
When the module is secured, please press down gently until it snaps into place.
Depending on how much additional memory you require, you may need to replace
the original memory module.
To remove a memory module:
Make sure the computer is turned off and remove screws securing the RAM cover.
Pop out both silver latches holding the memory module into place. The module pops
up. Grasp the outer edges of the memory module with the thumb and forefinger, and
then gently remove it.