User's Manual

29
The I/O connector supports the following signals:
Pin Description Direction
GND
USB Host Detect# IN
USB Power (+5V)
IN
USB Power (+5V)
IN
USB Host D+ IN/OUT
USB Host D- IN/OUT
USB Host +5V Enable OUT
DC_IN (+5V) IN
DC_IN (+5V) IN
USB Client D- IN/OUT
USB Client D+ IN/OUT
GND
GND
☞NOTE: Signals referenced are for a DTE device.
4.14. Peripherals and Accessories
The following items are sold separately and enhance your HANDY TERMINAL’s capabilities.
Single Slot Cradle
This charging and communication cradle supports USB communication, enabling your terminal to
interface with the majority of enterprise systems. When a terminal is seated in a powered base,
itsbattery pack charges in fourhours for the standard capacity 2400mAh pack, six hours for the
extended capacity 3600mAh pack.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
Single Ethernet Cradle
The Single Ethernet cradle is used to charge the battery, to power the battery charging system in
the terminal, and can be used to communicate data from the terminal to a PC/laptop via the
Ethernet port.
For more information, see Single Slot cradle/Single Ethernet cradle Device on paragraph 12.
4.15. USB ActiveSync Cable
The ActiveSync Cable is used when communicating between the terminal and a host computer to
transfer data via the USB interface.