User's Manual

2. Tap the Next Button on the bottom

Once asked if you need to authenticate the device,

3. Enter 4 random digits and tap the Next button.

4. Enter the same digits on the other device when prompted.

5. After pairing, tap on the selected device / profile and selectActive.

11.4.

Setting Up a Bluetooth Printer

1. Make sure that the Bluetooth printer is on and activated.

2. If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar).

3. Tap Scan Device, which runs a Bluetooth Inquiry, then SDP Query.

4. If you see your Bluetooth printer device displayed. You can press the Refresh button to search

again.

12. Single Slot cradle/Single Ethernet cradle Device

☞NOTE:

The cradle is option accessory and needed to purchase separately with incidental expensesin the aftermarket

12.1.

Overview

☞NOTE:

The information in this chapter applies to both the Single Slot cradle and Single Ethernet cradledevices unless

otherwise indicated.

As the hub of your HANDY TERMINAL system, the Single Slot cradle charging and communication

cradle supports full-speed USB 2.0 with a workstation. The Single Ethernet cradle is identical to the

Single Slot cradle except it supports Ethernet communication as well as full-speed USB 2.0

12.2.

Battery Charging

The base should complete a full charge of the battery pack in 5hours for the standard

capacity2400mAh: Battery Pack on the handy terminal

In addition to charging, the base powers the terminal’s intelligent battery charging system, which

protects the battery from being damaged by overcharging. The terminal senses when a battery pack

is fully charged and automatically turns off the charger. If the battery voltage drops below the

charge threshold, the charger turns on again to maintain the battery at full capacity. As a result,

Handy Terminals may be stored in the base indefinitely without damage to the terminals, battery

packs, or peripherals. For prolonged storage, see Storage Guidelines on paragraph 4.20.

12.3.

Power Supply

The power cable that ships with each terminal also powers the base.

WARNING:

We recommend use of Pointmobile peripherals, power cables, and power adapters. Use of any

non-Pointmobile peripherals, cables, or power adapters may cause damage not covered by the warranty.

We recommend use of Pointmobile Li-Ion battery packs. Use of any non- Pointmobile battery may damage not

covered by warranty.