User's Manual

71
13.5. Charging the Battery
The base powers the terminal and fully charges the battery pack in 5 hours depending on the
battery.
As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is
recommended for Li-Ion batteries.
The process monitors changes in temperature, current, and voltage.
The battery can be inserted in the battery charging well in back of the terminal connection. Angle
the battery as shown. Once the connectors engage, the LED lights. If the LED is red, the unit is
charging; if it is green, the charge is complete
Temperature has a significant effect on charging. For best results, battery packs should be at room
temperature before inserting in the charger.
☞ When the battery temperature exceeds 45°C, the charger may exceed the stated five-hour charge time. The charger
stops charging if the battery temperature is greater than 45°C, but will begin charging again when the battery
temperature is less than 45°C
.
WARNING: Do not short-circuit between each contact of the cradle. It may cause fire.
AVERTISSEMENT : Provoquer un court-circuit entre les contactsde la station d’accueil, pourrait provoquer un incendie.
1
2